Quad lighting gantry - system 35 lighting truss.

Exhibition Gantry, S35 Quad

System 35 Quad gantry components.

Coker Expo Quad lighting truss, System 35 gantry is TUV Certified it is the perfect aluminium exhibition stand frame and a place to hang digital banners, exhibition lighting and LCD screens. Coker Expo offer a complete exhibition system with a range of parts and components to allow the exhibition stand to be built in different sizes with ease.

A quad lighting truss with a very high load bearing offering easy erection by utilising precision spigot and pin connections. 35mm diameter extruded aluminium tube with turned and welded ends. The exhibition truss stand is truly modular, Parts range from 250mm going up to 3 meters. Coker Expo also offer a range of spacers starting from 10mm going up to 100mm.

Large stocks held, free exhibition design service, call 01256 768178 if you would like to know more.

Showing 9 products

S35 Quad Cube

The revolutionary system 35 truss "quad cube" supplied with 8 nodes or half conicals, as a two way junction. Add half conical node kits shown below to upgrade the junction to three way, four way, five or 6 way! This is a multi junction, truly. With this little gem there is no need to have a load of different junctions, so less components to store and transport. S35QBOX dimensions of 220mm x 220mm.

The revolutionary system 35 truss "quad cube" supplied with 8 nodes or half conicals, as a two way junction. Add half conical node kits shown below to upgrade the junction to three way, four way, five or 6 way! This is a multi junction, truly. With this little gem there is no need to have a load of different junctions, so less components to store and transport. S35QBOX dimensions of 220mm x 220mm.

£190
S35 Half Conical

Half conicals for quad gantry system 35, a multi box cube junction. With the addition of extra half conicals you can adapt your truss structure and create a new junction with your present box. Change your truss design with ease for different events and trade shows. This price is for a set of 4 supplied with tapered pin, safety clip and connection bolt.

Half conicals for quad gantry system 35, a multi box cube junction. With the addition of extra half conicals you can adapt your truss structure and create a new junction with your present box. Change your truss design with ease for different events and trade shows. This price is for a set of 4 supplied with tapered pin, safety clip and connection bolt.

£30
S35 Quad Straight Sections

Our quad lighting truss system has lengths ranging form 250mm right up to 3m in length. Each straight section comes with one set of conical connectors, pins and safety clips as standard. Straight trussing beams are used in the construction of legs and horizontal beams. Yes, longer lengths are cheaper but the cost is a loss of adaptability and possibly ease of build, particularly when it comes to raising up 2 tier trussing structures. Please feel free to call and discuss the options.

Our quad lighting truss system has lengths ranging form 250mm right up to 3m in length. Each straight section comes with one set of conical connectors, pins and safety clips as standard. Straight trussing beams are used in the construction of legs and horizontal beams. Yes, longer lengths are cheaper but the cost is a loss of adaptability and possibly ease of build, particularly when it comes to raising up 2 tier trussing structures. Please feel free to call and discuss the options.

£88
XL Gantry Base Plate

This is our extra large gantry base plate, it measures in at 800mm x 800mm x 6mm thick plate steel. Powder coated grey. If you are unable to bolt a single truss column into the floor or a portal, goal post design, then this base plate will give great support to your structure. The base plate must be used together with a standard base plate, the position of the standard base plate can be adjusted depending where its bolted to the XL base plate. this flexibility allows a goal post banner stand for example to be placed against a wall or free standing as a divider or arch. There are many ways of achieving an impressive design with gantry. you are welcome to use without charge our free modeling program, accessible from the home page. We are here to help please call 01256 768178 we have a gantry specialist in our team.

This is our extra large gantry base plate, it measures in at 800mm x 800mm x 6mm thick plate steel. Powder coated grey. If you are unable to bolt a single truss column into the floor or a portal, goal post design, then this base plate will give great support to your structure. The base plate must be used together with a standard base plate, the position of the standard base plate can be adjusted depending where its bolted to the XL base plate. this flexibility allows a goal post banner stand for example to be placed against a wall or free standing as a divider or arch. There are many ways of achieving an impressive design with gantry. you are welcome to use without charge our free modeling program, accessible from the home page. We are here to help please call 01256 768178 we have a gantry specialist in our team.

£150
S35 Quad Base

System 35 Quad base or wall plate, S35QBASE. We use these to do both jobs in our exhibition gantry range. A full set of pins and retaining clips are included with every base plate, conicals are directly bolted to the aluminium plate. Base plates go at the bottom of every leg and spread the load that any truss structure carries. Weight loading charts area available for our quad lighting truss system.

System 35 Quad base or wall plate, S35QBASE. We use these to do both jobs in our exhibition gantry range. A full set of pins and retaining clips are included with every base plate, conicals are directly bolted to the aluminium plate. Base plates go at the bottom of every leg and spread the load that any truss structure carries. Weight loading charts area available for our quad lighting truss system.

£45
Quad S35 3 Way corner

Quad system 35, this is the standard 3 way corner junction for a basic 4 sided structure in our quad lighting truss system, S35Q30. Each corner comes with a set of conical pins and clips. This trussing is manufactured and engineered to the very highest standards. The dims for all our truss junctions unless other wise stated are 500mm x 500mm x 500mm which makes designing a truss structure to the meter and half meter floor area very easy.

Quad system 35, this is the standard 3 way corner junction for a basic 4 sided structure in our quad lighting truss system, S35Q30. Each corner comes with a set of conical pins and clips. This trussing is manufactured and engineered to the very highest standards. The dims for all our truss junctions unless other wise stated are 500mm x 500mm x 500mm which makes designing a truss structure to the meter and half meter floor area very easy.

£180
Quad S35 T piece junction

A quad 3 way "T" piece S35QT35. A very adaptable junction to add to your truss components. This can be used in structures as a central down leg, as a horizontal beam and is very popular in aerial lighting truss rigs. The dimensions for this truss junction are 500mm x 500mm x 500mm and it will come with all required connection fittings.

A quad 3 way "T" piece S35QT35. A very adaptable junction to add to your truss components. This can be used in structures as a central down leg, as a horizontal beam and is very popular in aerial lighting truss rigs. The dimensions for this truss junction are 500mm x 500mm x 500mm and it will come with all required connection fittings.

£180
System 35 Exhibition Gantry Quad 90 degree 2 way junction

S35 Quad exhibition gantry, this is a standard quad 90 degree 2 way junction, S35Q21. Most usually used in aluminium trussing structures such as a basic portal or gaol post design or a simple square or oblong lighting rig suspended on cables or wires. We can provide the fixing brackets with lifting eyes to achieve this. This junction has dimensions of 500mmx500mm and will come with a set of fittings.

S35 Quad exhibition gantry, this is a standard quad 90 degree 2 way junction, S35Q21. Most usually used in aluminium trussing structures such as a basic portal or gaol post design or a simple square or oblong lighting rig suspended on cables or wires. We can provide the fixing brackets with lifting eyes to achieve this. This junction has dimensions of 500mmx500mm and will come with a set of fittings.

£105
Graphic wrapping for trio trussing systems

Full Leg - Part Leg or horizontal beam Gantry leg wraps 190mm and 290mm wide, self adhesive graphic wrap, perfect to dress up those truss legs and truss horizontal beams. We are able to wrap trussing systems that have 32mm dia tube, 35mm dia and even 50mm diameter tube sizes. Some times the ability to cover your trussing with digital branding can bring a new lease of life to tired trussing or just make a real eye catching statement at any exhibition or event. 2M and 2.5M legs (wraps do not cover the joints) These truss wraps are printed to sticky backed fabric and can be removed without leaving residue and can be stored for later use if reapplied to there release paper, so keep the original backing paper supplied! Artwork advice for 32/35mm dia systems, to wrap around the triangle you will require 710mm - 40mm of this will be overlapped at one end. We do not cover the joints so for the length reduce in each instance by 80mm. Ie a 1m length would be 920mm. Artwork advice for 50mm dia systems, to wrap around the triangle you will require 910mm - 40mm of this will be overlapped at one end. We do not cover the joints so for the length reduce in each instance by 100mm. Ie a 1m length would be 900mm. Question or advice on wrapping truss call on 01256 768178.

Full Leg - Part Leg or horizontal beam Gantry leg wraps 190mm and 290mm wide, self adhesive graphic wrap, perfect to dress up those truss legs and truss horizontal beams. We are able to wrap trussing systems that have 32mm dia tube, 35mm dia and even 50mm diameter tube sizes. Some times the ability to cover your trussing with digital branding can bring a new lease of life to tired trussing or just make a real eye catching statement at any exhibition or event. 2M and 2.5M legs (wraps do not cover the joints) These truss wraps are printed to sticky backed fabric and can be removed without leaving residue and can be stored for later use if reapplied to there release paper, so keep the original backing paper supplied! Artwork advice for 32/35mm dia systems, to wrap around the triangle you will require 710mm - 40mm of this will be overlapped at one end. We do not cover the joints so for the length reduce in each instance by 80mm. Ie a 1m length would be 920mm. Artwork advice for 50mm dia systems, to wrap around the triangle you will require 910mm - 40mm of this will be overlapped at one end. We do not cover the joints so for the length reduce in each instance by 100mm. Ie a 1m length would be 900mm. Question or advice on wrapping truss call on 01256 768178.

£45